**Institution:** ECPI University

**College:** Technology

**Sub-Program:** Engineering Technology

**Degree:** Bachelor of Science in Electronics Engineering Technology

**Canonical URL:** https://www.ecpi.edu/programs/mechatronics-bachelor-degree

**Last Updated:** 2026-10-01T16:35:11+00:00

## Mechatronics Degree Concentration Overview

The Bachelor of Science in Electronics Engineering Technology (EET) with a Mechatronics concentration combines electrical engineering and mechanical systems. This program integrates mechanical, electrical, and computer systems to create advanced technological solutions.

The Mechatronics concentration focuses on mechanical design and control systems, preparing graduates for robotics and automation. Students complete a capstone project using Programmable Logic Controllers and microcontroller programming. This program prepares graduates to design, install, maintain, and repair electronic equipment, bridging the gap between engineers and technicians.

Plus, students can complete this bachelor’s degree in just 2.5 years, preparing you to begin contributing to the field sooner.

- **124 Total Credits** — 2.5 Year Bachelor's Degree
- **5 Week Terms** — 2 Courses Per Term
- **Up to 93 Credits** — Transfer Credits

### Knowledge and Skills

Graduates should grow in the following areas:

- **Technical Proficiency:**
    Combine hardware and software solutions to address engineering problems and integrate diverse systems.
- **Mechanical Systems and Manufacturing Processes:**
    Apply mechanical principles in mechatronics and robotics, including microcontroller programming.
- **System Implementation and Laboratory Experience:**
    Analyze and implement mechatronic systems, including hydraulics and pneumatics, through lab work.

### Possible Career Paths

Graduates of this program pursue many different career paths. Some of the most common are:

- **Robotics Technician**
    Robotics technicians install, service, maintain, troubleshoot, and repair robots and automated systems. They must understand computers, electrical and electronic systems, sensor and feedback principles, and how robots function mechanically.
- **Calibration Technician**
    Calibration technologists and technicians ensure measurement devices provide accurate output. They inspect, adjust, and test these devices against standards used in manufacturing, healthcare, and other industries to ensure precision.
- **Controls Engineering Specialist**
    Controls engineers design and develop systems for manufacturing. They may create layouts, manage materials, information flow, or place machines. They also enhance efficiency by evaluating performance and implementing improvements.

## Program Structure and Learning Formats

### Locations

- [Raleigh, NC](https://www.ecpi.edu/locations/raleigh-nc)
- [Charlotte, NC](https://www.ecpi.edu/locations/charlotte-nc)
- [Virginia Beach, VA](https://www.ecpi.edu/locations/virginia-beach-va)
- [Newport News, VA](https://www.ecpi.edu/locations/newport-news-va)
- [Charleston, SC](https://www.ecpi.edu/locations/charleston-sc)
- [Greensboro, NC](https://www.ecpi.edu/locations/greensboro-nc)
- [Greenville, SC](https://www.ecpi.edu/locations/greenville-sc)
- [Orlando Lake Mary, FL](https://www.ecpi.edu/locations/orlando-lake-mary-fl)
- [San Antonio, TX](https://www.ecpi.edu/locations/san-antonio-tx)
- [Richmond, VA](https://www.ecpi.edu/locations/richmond-va)

## Mechatronics Curriculum

Bachelor of Science in Electronics Engineering Technology

### Featured Courses

- **Hydraulics & Pneumatics Systems** — MET230
    Students will learn various applications for power transmission and control systems.
- **Graphics Communication** — EET192
    Student will learn how to draw layouts and lettering; orthographic and pictorial projections; orthographic, auxiliary, and section views; dimensioning techniques; tolerancing; manufacturing processes; fasteners; and freehand sketches.

### Program Requirements

To receive the Bachelor of Science in Electronics Engineering Technology, students must earn 124 semester credit hours. The program requires a minimum of 8 semesters, which is equivalent to 30 months or 120 weeks of instruction. The program requirements are as follows:

#### Core Courses
52 semester credit hours

**Fulfill ALL of the following requirements:**

#### ELECTRICITY

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET110](https://www.ecpi.edu/course/EET110 "View EET110") | [Electric Circuits I](https://www.ecpi.edu/course/EET110 "View EET110") | 3 |
| [ESET111](https://www.ecpi.edu/course/ESET111 "View ESET111") | [Electric Circuits II](https://www.ecpi.edu/course/ESET111 "View ESET111") | 3 |
| [ESET111L](https://www.ecpi.edu/course/ESET111L "View ESET111L") | [Electric Circuits II Lab](https://www.ecpi.edu/course/ESET111L "View ESET111L") | 1 |
| [EET310](https://www.ecpi.edu/course/EET310 "View EET310") | [Circuit Analysis](https://www.ecpi.edu/course/EET310 "View EET310") | 3 |

AND

#### ANALOG ELECTRONICS

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET120](https://www.ecpi.edu/course/EET120 "View EET120") | [Semiconductor Devices](https://www.ecpi.edu/course/EET120 "View EET120") | 3 |
| [EET121](https://www.ecpi.edu/course/EET121 "View EET121") | [Electronic Systems Applications](https://www.ecpi.edu/course/EET121 "View EET121") | 3 |
| [EET220](https://www.ecpi.edu/course/EET220 "View EET220") | [Industrial Applications](https://www.ecpi.edu/course/EET220 "View EET220") | 3 |
| [EET221L](https://www.ecpi.edu/course/EET221L "View EET221L") | [Instrumentation and Measurement Lab](https://www.ecpi.edu/course/EET221L "View EET221L") | 1 |

AND

#### DIGITAL ELECTRONICS

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET130](https://www.ecpi.edu/course/EET130 "View EET130") | [Digital Systems I](https://www.ecpi.edu/course/EET130 "View EET130") | 3 |
| [EET230](https://www.ecpi.edu/course/EET230 "View EET230") | [Digital Systems II](https://www.ecpi.edu/course/EET230 "View EET230") | 3 |
| [EET230L](https://www.ecpi.edu/course/EET230L "View EET230L") | [Digital Systems Lab](https://www.ecpi.edu/course/EET230L "View EET230L") | 1 |

AND

#### NETWORKING

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [CST160](https://www.ecpi.edu/course/CST160 "View CST160") | [Introduction to Networking](https://www.ecpi.edu/course/CST160 "View CST160") | 3 |

AND

#### PROGRAMMING

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET207](https://www.ecpi.edu/course/EET207 "View EET207") | [Applied Engineering Programming](https://www.ecpi.edu/course/EET207 "View EET207") | 3 |
| [SDC100](https://www.ecpi.edu/course/SDC100 "View SDC100") | [Introduction to Programming](https://www.ecpi.edu/course/SDC100 "View SDC100") | 3 |

AND

#### CONTROL SYSTEMS

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET231](https://www.ecpi.edu/course/EET231 "View EET231") | [Introduction to Programmable Logic Controllers](https://www.ecpi.edu/course/EET231 "View EET231") | 3 |
| [EET231L](https://www.ecpi.edu/course/EET231L "View EET231L") | [Introduction to Programmable Logic Controllers Lab](https://www.ecpi.edu/course/EET231L "View EET231L") | 1 |
| [EET331](https://www.ecpi.edu/course/EET331 "View EET331") | [Programmable Controllers and Robotics](https://www.ecpi.edu/course/EET331 "View EET331") | 3 |
| [EET331L](https://www.ecpi.edu/course/EET331L "View EET331L") | [Programmable Controllers and Robotics Lab](https://www.ecpi.edu/course/EET331L "View EET331L") | 1 |

AND

#### EMBEDDED AND DRIVE SYSTEMS

**Earn at least 4 credits from the following:**

**Choose one lecture course and corresponding lab.**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET390](https://www.ecpi.edu/course/EET390 "View EET390") | [Motor Drives](https://www.ecpi.edu/course/EET390 "View EET390") | 3 |
| [EET390L](https://www.ecpi.edu/course/EET390L "View EET390L") | [Motor Drives Lab](https://www.ecpi.edu/course/EET390L "View EET390L") | 1 |
| [EET430](https://www.ecpi.edu/course/EET430 "View EET430") | [Microcontrollers](https://www.ecpi.edu/course/EET430 "View EET430") | 3 |
| [EET430L](https://www.ecpi.edu/course/EET430L "View EET430L") | [Microcontrollers Lab](https://www.ecpi.edu/course/EET430L "View EET430L") | 1 |

AND

#### SENIOR PROJECT

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET411](https://www.ecpi.edu/course/EET411 "View EET411") | [Senior Project](https://www.ecpi.edu/course/EET411 "View EET411") | 3 |
| [EET411L](https://www.ecpi.edu/course/EET411L "View EET411L") | [Senior Project Lab](https://www.ecpi.edu/course/EET411L "View EET411L") | 1 |

#### Arts and Sciences Courses\*
31 semester credit hours

**Fulfill ALL of the following requirements:**

**\*For allowable substitutions of arts and sciences courses, see the Arts & Sciences Department page.**

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [CAP480](https://www.ecpi.edu/course/CAP480 "View CAP480") | [Arts and Sciences Capstone](https://www.ecpi.edu/course/CAP480 "View CAP480") | 3 |
| [COM115](https://www.ecpi.edu/course/COM115 "View COM115") | [Principles of Communication](https://www.ecpi.edu/course/COM115 "View COM115") | 3 |
| [ENG110](https://www.ecpi.edu/course/ENG110 "View ENG110") | [College Composition](https://www.ecpi.edu/course/ENG110 "View ENG110") | 3 |
| [ENG120](https://www.ecpi.edu/course/ENG120 "View ENG120") | [Advanced Composition](https://www.ecpi.edu/course/ENG120 "View ENG120") | 3 |
| [HUM205](https://www.ecpi.edu/course/HUM205 "View HUM205") | [Culture, Thought, and the Human Experience](https://www.ecpi.edu/course/HUM205 "View HUM205") | 3 |
| [MTH131](https://www.ecpi.edu/course/MTH131 "View MTH131") | [College Algebra](https://www.ecpi.edu/course/MTH131 "View MTH131") | 3 |
| [MTH200](https://www.ecpi.edu/course/MTH200 "View MTH200") | [Pre-calculus](https://www.ecpi.edu/course/MTH200 "View MTH200") | 3 |
| [PHY120](https://www.ecpi.edu/course/PHY120 "View PHY120") | [Physics](https://www.ecpi.edu/course/PHY120 "View PHY120") | 3 |
| [PHY120L](https://www.ecpi.edu/course/PHY120L "View PHY120L") | [Physics Lab](https://www.ecpi.edu/course/PHY120L "View PHY120L") | 1 |

AND

#### Choose two of the following courses.

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [ECO201](https://www.ecpi.edu/course/ECO201 "View ECO201") | [Macroeconomics](https://www.ecpi.edu/course/ECO201 "View ECO201") | 3 |
| [ECO202](https://www.ecpi.edu/course/ECO202 "View ECO202") | [Microeconomics](https://www.ecpi.edu/course/ECO202 "View ECO202") | 3 |
| [PSY105](https://www.ecpi.edu/course/PSY105 "View PSY105") | [Introduction to Psychology](https://www.ecpi.edu/course/PSY105 "View PSY105") | 3 |
| [PSY225](https://www.ecpi.edu/course/PSY225 "View PSY225") | [Industrial/Organizational Psychology](https://www.ecpi.edu/course/PSY225 "View PSY225") | 3 |

#### Self-Integration Courses
10 semester credit hours

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [COR191](https://www.ecpi.edu/course/COR191 "View COR191") | [Career Orientation](https://www.ecpi.edu/course/COR191 "View COR191") | 1 |
| [CST120](https://www.ecpi.edu/course/CST120 "View CST120") | [Computer Configuration I](https://www.ecpi.edu/course/CST120 "View CST120") | 3 |
| [ET102](https://www.ecpi.edu/course/ET102 "View ET102") | [Engineering Math and Software Applications](https://www.ecpi.edu/course/ET102 "View ET102") | 3 |
| [FOR110](https://www.ecpi.edu/course/FOR110 "View FOR110") | [Essentials for Success](https://www.ecpi.edu/course/FOR110 "View FOR110") | 3 |

#### Mechatronics Concentration Courses
16 semester credit hours

**Complete ALL of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [MET191](https://www.ecpi.edu/course/MET191 "View MET191") | [Materials Science](https://www.ecpi.edu/course/MET191 "View MET191") | 3 |
| [MET192](https://www.ecpi.edu/course/MET192 "View MET192") | [Graphics Communication](https://www.ecpi.edu/course/MET192 "View MET192") | 3 |
| [MET192L](https://www.ecpi.edu/course/MET192L "View MET192L") | [Introduction to 3-D Modeling LAB](https://www.ecpi.edu/course/MET192L "View MET192L") | 1 |
| [MET211](https://www.ecpi.edu/course/MET211 "View MET211") | [Statics](https://www.ecpi.edu/course/MET211 "View MET211") | 3 |
| [MET230](https://www.ecpi.edu/course/MET230 "View MET230") | [Hydraulics and Pneumatics Systems](https://www.ecpi.edu/course/MET230 "View MET230") | 3 |
| [MET410](https://www.ecpi.edu/course/MET410 "View MET410") | [Dynamics](https://www.ecpi.edu/course/MET410 "View MET410") | 3 |

#### Elective Courses
15 semester credit hours

**Fulfill ANY of the following requirements:**

#### BUSINESS

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [BUS102](https://www.ecpi.edu/course/BUS102 "View BUS102") | [Fundamentals of Customer Service](https://www.ecpi.edu/course/BUS102 "View BUS102") | 3 |
| [BUS121](https://www.ecpi.edu/course/BUS121 "View BUS121") | [Introduction to Business](https://www.ecpi.edu/course/BUS121 "View BUS121") | 3 |
| [BUS242](https://www.ecpi.edu/course/BUS242 "View BUS242") | [Emerging Technologies and World of AI](https://www.ecpi.edu/course/BUS242 "View BUS242") | 3 |
| [BUS328](https://www.ecpi.edu/course/BUS328 "View BUS328") | [Business Process Improvement](https://www.ecpi.edu/course/BUS328 "View BUS328") | 3 |
| [BUS328L](https://www.ecpi.edu/course/BUS328L "View BUS328L") | [Business Process Improvement LAB](https://www.ecpi.edu/course/BUS328L "View BUS328L") | 1 |
| [PMT472](https://www.ecpi.edu/course/PMT472 "View PMT472") | [Applied Project Management](https://www.ecpi.edu/course/PMT472 "View PMT472") | 3 |
| [PMT472L](https://www.ecpi.edu/course/PMT472L "View PMT472L") | [Applied Project Management Lab](https://www.ecpi.edu/course/PMT472L "View PMT472L") | 1 |

OR

#### ELECTRONICS

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET233](https://www.ecpi.edu/course/EET233 "View EET233") | [Robotics and Smart Manufacturing (SM)](https://www.ecpi.edu/course/EET233 "View EET233") | 3 |
| [EET233L](https://www.ecpi.edu/course/EET233L "View EET233L") | [Robotics and Smart Manufacturing (SM) Lab](https://www.ecpi.edu/course/EET233L "View EET233L") | 1 |
| [EET301](https://www.ecpi.edu/course/EET301 "View EET301") | [Special Topics in Engineering Technology](https://www.ecpi.edu/course/EET301 "View EET301") | 3 |
| [EET350](https://www.ecpi.edu/course/EET350 "View EET350") | [Overview of Electronic Security Devices](https://www.ecpi.edu/course/EET350 "View EET350") | 3 |
| [EET352](https://www.ecpi.edu/course/EET352 "View EET352") | [Engineering Economics](https://www.ecpi.edu/course/EET352 "View EET352") | 3 |

OR

#### INFORMATION SYSTEMS

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [CST140](https://www.ecpi.edu/course/CST140 "View CST140") | [Introduction to Operating Systems](https://www.ecpi.edu/course/CST140 "View CST140") | 3 |
| [CYB120](https://www.ecpi.edu/course/CYB120 "View CYB120") | [Introduction to Python Programming](https://www.ecpi.edu/course/CYB120 "View CYB120") | 3 |
| [SDC100L](https://www.ecpi.edu/course/SDC100L "View SDC100L") | [Introduction to Programming LAB](https://www.ecpi.edu/course/SDC100L "View SDC100L") | 1 |

OR

#### MATH

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [MTH220](https://www.ecpi.edu/course/MTH220 "View MTH220") | [Applied Calculus I](https://www.ecpi.edu/course/MTH220 "View MTH220") | 3 |
| [MTH320](https://www.ecpi.edu/course/MTH320 "View MTH320") | [Applied Calculus II](https://www.ecpi.edu/course/MTH320 "View MTH320") | 3 |

OR

#### MECHANICAL

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [MET114](https://www.ecpi.edu/course/MET114 "View MET114") | [Introduction to Geometric Dimensioning and Tolerancing (GD and T)](https://www.ecpi.edu/course/MET114 "View MET114") | 3 |
| [MET213](https://www.ecpi.edu/course/MET213 "View MET213") | [Advanced 3D Modeling](https://www.ecpi.edu/course/MET213 "View MET213") | 3 |
| [MET221](https://www.ecpi.edu/course/MET221 "View MET221") | [Manufacturing Processes](https://www.ecpi.edu/course/MET221 "View MET221") | 3 |
| [MET223](https://www.ecpi.edu/course/MET223 "View MET223") | [Applied Machine Tools](https://www.ecpi.edu/course/MET223 "View MET223") | 3 |
| [MET224](https://www.ecpi.edu/course/MET224 "View MET224") | [CNC Machines Operation](https://www.ecpi.edu/course/MET224 "View MET224") | 3 |
| [MET230L](https://www.ecpi.edu/course/MET230L "View MET230L") | [Hydraulics and Pneumatics Systems Lab](https://www.ecpi.edu/course/MET230L "View MET230L") | 1 |
| [MET311](https://www.ecpi.edu/course/MET311 "View MET311") | [Mechanisms](https://www.ecpi.edu/course/MET311 "View MET311") | 3 |
| [MET313](https://www.ecpi.edu/course/MET313 "View MET313") | [Applied Strength of Materials](https://www.ecpi.edu/course/MET313 "View MET313") | 3 |
| [MET330](https://www.ecpi.edu/course/MET330 "View MET330") | [Applied Fluid Mechanics](https://www.ecpi.edu/course/MET330 "View MET330") | 3 |
| [MET330L](https://www.ecpi.edu/course/MET330L "View MET330L") | [Applied Fluid Mechanics Lab](https://www.ecpi.edu/course/MET330L "View MET330L") | 1 |

OR

#### EXTERNSHIP

**Complete ANY of the following Courses:**

| Course ID | Course Name | Credit Hours |
|---|---|---|
| [EET302](https://www.ecpi.edu/course/EET302 "View EET302") | [Externship-EET Sr. III](https://www.ecpi.edu/course/EET302 "View EET302") | 3 |
| [EET306](https://www.ecpi.edu/course/EET306 "View EET306") | [Externship-EET Sr. I-a](https://www.ecpi.edu/course/EET306 "View EET306") | 1 |
| [EET307](https://www.ecpi.edu/course/EET307 "View EET307") | [Externship-EET Sr. I-b](https://www.ecpi.edu/course/EET307 "View EET307") | 1 |
| [EET308](https://www.ecpi.edu/course/EET308 "View EET308") | [Externship-EET Sr. I-c](https://www.ecpi.edu/course/EET308 "View EET308") | 1 |
| [EET309](https://www.ecpi.edu/course/EET309 "View EET309") | [Externship-EET Sr. II](https://www.ecpi.edu/course/EET309 "View EET309") | 2 |

## Certifications

ECPI University understands the power of certifications in today's dynamic technology field, and we believe enhancing your marketability is crucial.

- **ETA International** — Certified Fiber Optic Installer
    A Fiber Optic Installer is proficient at the installation of connectors on various types of fiber optic cables using multiple types of connectors, and can perform mechanical and fusion splicing.
- **ETA International** — Certified Fiber Optic Technician
    An FOT can effectively locate faults in a fiber optic cable, mated connector pair, or splice as well as evaluate optical fiber performance, mated connector pair performance, or splice performance for compliance with TIA-568.
- **CompTIA** — A+ (Core 1 & 2)
    Core 1 covers essential hardware, networking, and troubleshooting skills. Core 2 covers operating systems, security, and troubleshooting. Both together prepare you for IT support and help desk roles.
- **CompTIA** — Network+
    The CompTIA Network+ certification proves foundational skills in networking, troubleshooting, and security, ideal for entry-level IT professionals.
- **CompTIA** — Security+
    The CompTIA Security+ cert validates essential skills in threat management, risk mitigation, and network security.

## Accreditation

ECPI University is accredited by the Southern Association of Colleges and Schools Commission on Colleges (SACSCOC) to award associate, baccalaureate, and master’s degrees.

Full accreditation details: [ECPI University Accreditation](https://www.ecpi.edu/accreditation).